| SYMPTOM/PROBLEM |
TYPICAL CAUSE |
POSSIBLE SOLUTION |
| “LoBAtt” |
Batteries below 7 vdc |
Replace batteries. |
| No Display |
No power. |
Check to ensure power cord is plugged into the outlet. |
|
|
Check circuit breaker. |
| Beeps and display flashes |
Limit value enabled |
Press the Total key. Press the PLUS key. Press the CLEAR key. Press ENTER to return to the weigh mode. |
|
|
Battery Models – Press the TOTAL key twice. Enter “0” from the numeric keypad and press ENTER. Press TOTAL to return to the weigh mode. |
| Does not return to ZERO. Does not repeat known weight. |
Bind |
Check for debris under platform. |
|
|
Check for objects leaning against the platform. |
|
Defective load cell |
Call for service. |
| Incorrect count |
Sample size too small. |
Resample the product using a larger quantity of pieces. |
|
Pieces weighed are not uniform |
Resample the product using a larger quantity of pieces. |
